MONITOR AUDIO MASS W200

  • Kraunamos nuotraukos
    Kodas: SMASSW200
    550  su PVM
    Į krepšelį 

    The W200 is a subwoofer with a potent 220W DSP controlled Class D amplifier. It powers a side-firing 10” long throw C-CAM bass driver equipped with a huge, dual stack magnet system. Complementing the active driver is a 10” Auxiliary Bass Radiator (ABR). Select ‘music’, ‘movie’ and ‘impact’ pre-set response curves using a back-panel switch. 

    Mato vnt.:
    1 vnt.

    System Format
    Active sub-woofer system - Auxilary (ABR) loading. 18mm MDF cabinet (CARB2 approved)

    Low Frquency Limit
    30Hz (-6dB)

    Upper frequency limit
    Variable 40 - 120Hz @ 24dB/Octave

    Amplifier Power Output
    220 watts @ 1% THD+N

    Amplifier Classification
    Class - D amplifier with Switch mode power supply (SMPSU)

    Bass EQ Switch
    Music / Movie / Impact

    Phase Control
    0-180 degrees

    Auto Sensing
    Line Level >3.5mmV

    Input Level Requirements
    Standby after approx. 20 minutes if no signal sensed

    Driver Compliment
    1 x 10" (250mm) C-CAM® Long Throw Driver
    1 x 10" (260mm) Auxilary bass radiator

    Input Impendence
    > 20K Ohms

    Mains input voltage
    100 - 120 Vac / 220 - 240 Vac 50/60Hz (Factory Region Present)

    Dimensions (H x W x D)(Including grilles and feet)
    420 x 385 x 385 mm / 169/16 x 163/16 x 163/16 Inches

    Connections
    Stereo RCA in, LFE in, 12v Trigger in (3.5 mono mini-jack)

    12v Trigger input
    5 12v via 3.5 via mono mini-jack socket

    Power Consumption
    200 watts / 0.5 watts in Standby (ErP approved)

    Weight
    15.96Kg (35lb, 2oz)