• Kraunamos nuotraukos
    Kodas: AT-OC9/III
    54900 su PVM
    Į krepšelį 

    AT-OC9/III Cartridge (NON MicroLine)

    Mato vnt.:
    1 vnt.

    Features a special line contact stylus
    Builds on the enduring reputation of its predecessor, the AT-OC9/III
    "VC mould" design ensures stability and rigidity
    Dual moving coil offers excellent stereo separation
    PCOCC wire

    Type Dual Moving Coil
    Frequency Response 15 - 50,000Hz
    Body Material Aluminium
    Channel Separation 30dB (1kHz)
    Output Channel Balance 0.5dB (1kHz)
    Output Voltage 0.4mV (1kHz and 5cm/sec.)
    Vertical Tracking Angle 23°
    Vertical Tracking Force Range 1.8 - 2.2g (2.0g standard)
    Stylus Shape Special Line contact stylus (curvature radius: )
    Stylus Curvature Radius 40 x 7µm
    Stylus Construction Nude Square Shank
    Cantilever 0.26 mm diameter solid boron
    Coil Impedance 12Ω (1kHz)
    Coil Inductance 25 µm (1kHz)
    DC Resistance 12Ω
    Static Compliance 35×10-6cm/dyne
    Dynamic Compliance 18×10-6cm/dyne (100Hz)
    Recommended Load Impedance Min 100Ω
    Weight 8.0g
    Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
    Replacement Stylus When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.
    Accessories Included One non-magnetic screwdriver; one brush; two washers; two 12mm mounting screws; two nuts; two 18mm mounting screws; one plastic protector; one set of PCOCC Lead Wires (AT6106)