ARCAM FMJ A19

  • Kraunamos nuotraukos
    Kodas: A19
    849  su PVM
    Į krepšelį 

    ARCAM FMJ A19 pradžiugins muzikos mylėtojus. Šis stiprintuvas turi išskirtinės kokybės atvirą ir detalų garsą su ypatingai mažu iškraipymo lygiu. Stiprintuvas puikiai tiks tiems, kurie ieško geros garso kokybės už protingą kainą.

    Mato vnt.:
    1 vnt.

    Technical Specifications

    Continuous power output (20Hz—20kHz at 0.5% THD), per channel

    Both channels, 8Ω, 20Hz—20kHz: 50W
    Single channel, 4Ω, at 1kHz: 90W
    Harmonic distortion, 80% power, 8Ω at 1kHz: 0.003%
    Inputs

    Phono (MM) cartridge

    Input sensitivity at 1kHz: 5mV
    Input impedance: 47kΩ + 100pF
    Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB
    Signal/noise ratio (Awtd) 50W, ref. 5mV input: 80dB
    Overload margin, 50mV at 1kHz: 20dB
    Line and AV inputs

    Nominal sensitivity: 1V
    Input impedance: 10kΩ
    Maximum input: 4.6Vrms
    Frequency response: 20Hz—20kHz ± 0.2dB
    Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
    Outputs

    Preamplifier output

    Nominal output level: 630mV
    Output impedance: 230Ω
    Heaphones Output

    Maximum output level into 600Ω: 4V
    Output impedance: 1ohm
    Load range: 16Ω—2kΩ
    Accessory power output

    Using accessory power cable supplied, provides two 2.1mm DC connectors: 6V, 1A
    General

    Mains voltage: 110–120V~ or 220–240V~
    Power consumption (maximum): 350W
    Dimensions W x D x H (including feet): 432 x 275 x 85mm
    Weight (net): 8.5kg
    Weight (packed): 10.2kg
    Supplied accessories: Mains lead, CR108 remote control, 2 x AAA batteries, Accessory power cable
    E&OE - All specification values are typical unless otherwise stated.